提高钻速新技术研究进展

摘要/Abstract

摘要： 提高钻井速度可以缩短建井周期，降低建井成本，对于提高油气藏开发效率和效益具有重要意义。总结介绍了国内外最新的提高钻速技术研究及其应用，按提高钻速的原理将其分为两类：直接提高钻速技术，包括新型钻井工具使用和钻井参数优化等；间接提高钻速技术，包括控压钻井技术，无意外风险钻井技术等。提出应根据所钻区域地质特征，合理设计钻井方案，选择合适钻井工具，优化钻井参数，钻井时进行实时监控和专家决策，减少复杂情况发生次数及处理时间等方法和措施综合应用，才能最大限度提高钻井速度。

关键词: 钻井技术 , 钻井工具, 钻头, 钻速, 扩眼器, 稳定器

李广, 郭辛阳, 李娟. 提高钻速新技术研究进展[J]. 钻采工艺, 2010, 33(6): 31-35.

LI Guang, GUO Xin-Yang, LI Juan. [J]. DPT, 2010, 33(6): 31-35.

参考文献

[1] 史怀忠,李根生,沈忠厚.水力脉冲空化射流钻井研究[C].首届油气资源国际博士生学术论坛论文集,2007:681-685.
[2] 王学杰,李根生,康延军,等.利用水力脉冲空化射流复合钻井技术提高钻速[J].石油学报,2009,30(1):117-120.
[3] Enis Aliko, Terry Hunt, Mathews George, et al. New-Generation PDC Bits Allow Drilling at Record Rates of Penetration and Increased Durability in Challenging Algerian Applications. IADC/SPE 112733.
[4] Steven Radford, Tracy Li, Mark Jenkins. Novel Concentric Expandable Stabilizer Results in Increased Penetration Rates and Drilling Efficiency with Reduced Vibration. SPE/IADC 119534.
[5] H. Andersen, A. Vigrestad, NTNU, et al. Hydraulic Optimization of Aerated Mud Drilling for Maximum Drilling Rate. IADC/SPE 122206.
[6] Wang Meishan. Matching Technique of Enhancing Drilling Rate Safely in Tight Area of Chang Lu in Dagang Oilfield. IADC/SPE 114681
[7] Don Hannegan P.E., Richard, J. Todd, et al. MPD – Uniquely Applicable to Methane Hydrate Drilling. SPE/IADC 91560.
[8] Don M. Hannegan. Managed Pressure Drilling in Marine Environments-Case Studies[C]. SPE / IADC 92600.
[9] Mark J. Chustz, James May, Cameron Wallace, et al. Managed Pressure Drilling With Dynamic Annular Pressure-Control System Proves Successful in Redevelopment Program on Auger TLP in Deepwater Gulf of Mexico. IADC/SPE 108348.
[10] Nyoman Dharma, J.S.S. Toralde. Managed-Pressure Drilling and Downhole Isolation Technologies Deliver High Rate Gas Wells. SPE/IADC 114703.
[11] P. Vieira, M. Arnone, B. Russel, et al. Constant Bottomhole Pressure: Managed Pressure Drilling Technique Applied in an Exploratory Well in Saudi Arabia. SPE/IADC 113679.
[12] WALT Aldred, IAIN Cooper, CENGIZ Esmersoy, et al. Avoiding drilling problems[J]. Oilfield Review, 2001, 13(2): 32-51.
[13] USMAN Ahmed, KAREN Glaser, EDUARD Siebrits, et al. Watching rocks change- mechanical earth modeling [J]. Oilfield Review, 2003, 15(2): 22-39.
[14] TORRES M E, FRYDMAN M, CASALIS D, et al. 3D Analysis for wellbore stability: reducing drilling risks in Oriente Basin, Ecuador [R]. SPE 94758, American, 2005.
[15] 连志龙,周英操,申瑞臣,等. 无意外风险钻井（NDS）技术探讨[J].石油钻采工艺,2009,31(1):90-94.
[16] S.J. Sawaryn, S. Goodwin, A. Deady, et al. The Implementation of a Drilling and Completions Advanced Collaborative Environment-Taking Advantage of Change. SPE 123801.
[17] Dossary A S. Challenges and Achievements of Drilling Maximum Reservoir Contact (MRC) Wells in Shaybah Field. SPE 85307.
[18] Ginest N H. First Deep Multi-Lateral Gas Wells: Objectives, What We Got, Lessons Learned and Next Steps. SPE 93530.
[19] 江怀友, 沈平平, 裘怿楠, 等. 世界石油工业MRC技术及中国陆相储层应用模式研究[J]. 大庆石油地质与开发, 2008, 27(3): 78-82.
[20] Stig Lyngra, Abdulkareem M. Al-Sofi, Uthman F. Al-Otaibi, et al. New Technology Applications for Improved Attic Oil Recovery: The World's First Slim Smart Completions. IPTC 12365.
[21] Abouzar Mirzaei Paiaman, J. Moghadasi. An Overview to Applicability of Multilateral Drilling in the Middle East Fields. SPE 123955
[22] Abdullah M. Qahtani, Hiba Dialdin. Future Advanced Completion Technologies to Maximize Recovery. OTC 20136.